Chinese 
English
For the ejector sleeve of the mould industry, we specially design a four-spindle deep hole drilling machine with high precision and high automation. And its good processing precision and processing efficiency have gained a high praise from our customer.
Below is the picture of our machine
It’s a four-spindle counter-rotary deep hole drilling machine, for the workpiece is clamped by the self-centering chuck, which we specially bought from Germany. Only for one time installation, we can get a high precision of step hole. For this machine, it can put 22 pc workpiece on the rack one time, in this way, it greatly decrease the auxiliary time and promote the processing efficiency. Also another advantage is that, it can reduce the work force of the worker.
The biggest advantage of our machine is easy to operate. The drilling range is from 100mm---320mm, and the drilling hole diameter is from 1mm---8mm, and we can easily adjust the clamping diameter to fit the specification of your workpiece.
Here is the basic information of our machine
Processing method: external chip removal gun drilling method.
Drilling hole diameter: 1.5mm----8mm
Drilling length: 300mm from one side.
Automatic loading mechanism: it can place 22 pcs workpiece at a time. The rack is driven through servo control and transversal travel. Processing two workpiece at the both side for one time. Only need to set the program for one time, all the 22 pcs workpiece can be processed.
CNC system: GSK980TDC/FANUC OI Mate MD
Drill stem: frequency speed adjustment, rotating and feeding.
Guide sleeve: guide sleeve on the left axial restraint, guide sleeve on the right hydraulic driven, both to tight the workpiece.
Clamping: use self-centering V shape special fixture to clamp the outside diameter of the workpiece. Hydraulic driven to tight the workpiece, accuracy and reliable.
If any question, please feel free to contact us.
